Print Page | Close Window

06 grand cherokee heated seats

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96605
Printed Date: May 14, 2025 at 10:36 AM


Topic: 06 grand cherokee heated seats

Posted By: dannyho
Subject: 06 grand cherokee heated seats
Date Posted: August 23, 2007 at 12:01 PM

I'm putting a remote start in a 06 grand cherokee srt-8 and the customer requested that I add the heated seats function to the aux channel of the remote.  The alarm is branded Carroll Shelby, and it's a nice unit but I'm sure it's jsut rebranded, not sure who really made it.   but my question is really about how to interface the heated seats. 

I'm not familiar with this particular request but the only information I've found on the seat switches is this, from wjjeeps.com

"The two, three-position rocker-type switches, one switch for each front seat, provide a resistor multiplexed signal to the Body Control Module (BCM) through separate hard wired circuits.  Each switch has an Off, Low, and High position so that both the driver and the front seat passenger can select a preferred seat heating mode."

The custom isn't going to care if he can control the level of the heat, just that it turns on.  how would this be done?




Replies:

Posted By: peterubers
Date Posted: August 23, 2007 at 7:05 PM
Wouldn't they just be left ON (either high or low) in the winter months so the seat warms always just came on with ignition?

-------------
The search function is your friend.



Posted By: peterubers
Date Posted: August 23, 2007 at 7:07 PM

If you did it by the AUX channel (-) output, you'd have to utilize a relay with the appropriate resistance, which I'm sure what resistance that is for each of the settings.



-------------
The search function is your friend.


Print Page | Close Window