Print Page | Close Window

compustar 2w900fmas

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96647
Printed Date: May 21, 2024 at 2:57 PM


Topic: compustar 2w900fmas

Posted By: mikvot
Subject: compustar 2w900fmas
Date Posted: August 25, 2007 at 12:09 PM

Hey guys, i'm putting this system on a 03 silverado. The customer wants the factory horn to chirp on lock and unlock and obviously when the alarm is triggered. I'm using the white (-) 250 ma output of the system to a relay going to the black wire of the truck, but i'm not getting any chirps. Is there something i need to change in the programming, or is it even possible. This is how the relay is setup, and i know it's correct. 86 12v, 85 white(-) 250, 87  ground, 30 out to vehicles horn.

Thanks for any help,

Mike

                                        



-------------



Replies:

Posted By: mikvot
Date Posted: August 25, 2007 at 12:22 PM
Alright, i got it figured out, the white(250)ma will not chirp the factory horn on lock, and unlock, but will honk during a full trigger. That's good enough for me.

-------------



Posted By: xtremej
Date Posted: August 27, 2007 at 1:17 PM
It has to be programmed to trigger the horn  on lock/unlock.


Print Page | Close Window