Print Page | Close Window

remote fob compatability

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96670
Printed Date: May 12, 2025 at 7:55 PM


Topic: remote fob compatability

Posted By: 1981eet
Subject: remote fob compatability
Date Posted: August 26, 2007 at 6:28 PM

I have installed a Bulldog Security Deluxe 200B in my 1998 Ford Ranger. All worked fine until my fob died. (guess I dropped it too many times) Anyway, there is an FCC ID on the back of the fob - H50TR13. So I have seached the net for a new or even used fob. One comes up with the same FCC ID, but is a different manufacturer (Carbine). Can anyone tell if it is compatible with my system? Also, I did find one (correct manufacturer, but used item) on ebay (aftermarketremotes), but they are asking $80 buy it now. This seems a little excessive, since I only paid $85 for the entire system new. Does anyone know where I can get the original fob without buying a whole new system? I have seen entire systems on ebay for $40 + $15 shipping...



Replies:

Posted By: KarTuneMan
Date Posted: August 26, 2007 at 6:33 PM

Did you contact Bulldog?



-------------



Posted By: 1981eet
Date Posted: August 26, 2007 at 6:39 PM

No, I no longer have the receipt, & didn't register for warranty when I bought it. I also read on this forum that Bulldog had closed, but may be reopening? Another thing, if I go to bulldogsecurity.com, & try to find this particular remote, it is not listed.


Print Page | Close Window