Print Page | Close Window

2008 nissan altima remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96870
Printed Date: May 13, 2025 at 4:37 AM


Topic: 2008 nissan altima remote start

Posted By: cashmoney
Subject: 2008 nissan altima remote start
Date Posted: September 03, 2007 at 8:46 PM

I need to install a remote start on a 2008 Nissan Altima.  It has the intelli key start. Does anyone have any specifics as far as the wiring diagram and  what type of ignition module it uses?



-------------
cashmoney



Replies:

Posted By: extreme1
Date Posted: September 03, 2007 at 8:51 PM
It's a pain in the ass, go to www.ifar.ca and look up the manual for a CAN-SL2i

very detailed instructions on how to do the install

-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta



Posted By: cashmoney
Date Posted: September 04, 2007 at 4:25 PM

Does anyone have a wiring diagram?




Posted By: extreme1
Date Posted: September 06, 2007 at 9:04 AM
extreme1 wrote:
It's a pain in the ass, go to www.ifar.ca and look up the manual for a CAN-SL2i

very detailed instructions on how to do the install



It's all in that bypass's instructions

-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta


Print Page | Close Window