concept 600 remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96921
Printed Date: April 27, 2024 at 6:47 PM
Topic: concept 600 remote start
Posted By: eireal
Subject: concept 600 remote start
Date Posted: September 06, 2007 at 8:46 AM
One of my friends bought a car with a preinstalled clifford concept G4 600 (uk),he was also given an intellistart 4 module with the car that hadnt been installed.
I took a look at it for him and connected it up but the problem is the car is trying to crank once started.
I probed the BLACK/ grey wire on the alarm with a DMM and it fluctuates with the revs,i then cut the wire and connected car side to intellistart 4,but once started car is trying to crank.
To make sure its the right wire,i disconnected it and blackjax wont activate,reconnected it to the alarm side wire and blakjax activates.
Has anyone got an idea what the problem may be?
Thanks
Replies:
Posted By: eireal
Date Posted: September 06, 2007 at 9:15 AM
Sorry i ment to add,
The car is starting but then knocking off after about 5 seconds,then remote starting again.
If you put the key in and turn to on then depress brake it still keeps trying to crank
Posted By: init
Date Posted: September 06, 2007 at 1:30 PM
If it fluctuates with the revs it might be the tach wire. Make sure the system has learned the signal properly.
Posted By: eireal
Date Posted: September 06, 2007 at 4:46 PM
I done an rpm learn via the grid and problem seems to be solved
|