peugeot 306 alarm to indicators
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96971
Printed Date: May 23, 2024 at 3:18 PM
Topic: peugeot 306 alarm to indicators
Posted By: jolian
Subject: peugeot 306 alarm to indicators
Date Posted: September 08, 2007 at 11:37 AM
Hi,
can anyone advise the best way to connect a generic alarm to the indicators of a 1995 Peugeot 306? I was thinking of wiring it to a single point somewhere behind the dash I guess, as opposed to running wires to all the indicators individually, but I don't know where to find the wiring for the indicators. If anyone knows, please post the location.
Thanks
Replies:
Posted By: howie ll
Date Posted: September 08, 2007 at 6:07 PM
BSI box to the right of and adjacent to fuse box (assuming right hand drive). Black plug, test in situ, 2 of the leads will correspond to left and right indicators, alternatively pull hazard switch(dead easy) 1 lead will correspond to each side, also ign sense/stand off can be picked up there. Don't ask me for colours, Peugeot /Citroen have a wierd and wonderful wiring clour code, just test!
Posted By: jolian
Date Posted: September 09, 2007 at 10:56 AM
Thanks I'll try that tomorrow. Where would you reckon are the best places (in a peugeot 306) to place a microwave sensor? preferably in a not so conspicuous location which isn't so hard(or messy) to wire up
Posted By: howie ll
Date Posted: September 09, 2007 at 3:29 PM
At this point I'll be billing you! If you can't do this take it to a pro. The answer is roof lning to rear of dome light or centre console but that's not such a great place, especially if you have tinted glass.
|