Print Page | Close Window

clifford smartwindows 4 prob

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96994
Printed Date: July 06, 2025 at 5:28 AM


Topic: clifford smartwindows 4 prob

Posted By: pepe1fetha
Subject: clifford smartwindows 4 prob
Date Posted: September 09, 2007 at 11:32 AM

I have two smartwindows 4 in a 2005 Tacoma, one running the fronts and the second the rears. this is the first time i've installed them for 4 windows. When I first installed them they worked fine. I programmed it with the cliffnet wiz  with no problem. about a month later, the fronts stopped working. it wouln't allow me to even roll up the fronts from the driver's switch. but when i use the transmitter, i can roll the windows down but not up.  Thinking that i blew the module i ordered a new one. So I got a new module and installed and programmed it. now the fronts work fine, but the rears are doing the same thing as the old front unit.  do i have another blown unit? If not, what is causing it?

Thanks

Eric S



-------------
pepe1fetha



Replies:

Posted By: pepe1fetha
Date Posted: September 11, 2007 at 9:37 PM

i'm still having the same problem. anyone have an idea what is wrong?

thanks



-------------
pepe1fetha



Posted By: howie ll
Date Posted: September 12, 2007 at 2:04 AM
Methinks it's a programming glitch, can't remember how to manually do it, should be with instructions, did it via Wiz


Print Page | Close Window