status led cut, alarm not working

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96995
Printed Date: July 05, 2025 at 7:42 PM

Topic: status led cut, alarm not working

Posted By: lagzo
Subject: status led cut, alarm not working
Date Posted: September 09, 2007 at 12:05 PM

I pulled out my center console to fix my headunit. The wires for the LED status light was connected to the center console and got ripped off. There are 2 wires, RED / blue that are sort of twisted. I tried connecting them back together but nothing happens. I can't use my remote to get into my car. Any suggestions? The model is an Autopage RF-315 btw.

Replies:

Posted By: lagzo
Date Posted: September 09, 2007 at 12:07 PM

oh and my car is a 1992 honda prelude

Posted By: howie ll
Date Posted: September 09, 2007 at 3:31 PM

Check the alarm fuses, in theory pulling the LED leads without shorting anything shouldn't affect the alarm

Posted By: lagzo
Date Posted: September 09, 2007 at 3:40 PM

howie ll wrote:

Check the alarm fuses, in theory pulling the LED leads without shorting anything shouldn't affect the alarm

I've never checked the blade type fuses. What do I look for? Black coloring? In the glass type fuses I look for burnt parts, it should be the same?

Posted By: lagzo
Date Posted: September 09, 2007 at 6:24 PM

Thank you, you solved my problem!

Print Page | Close Window