keyless trunk release problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97000
Printed Date: April 18, 2024 at 12:28 PM
Topic: keyless trunk release problem
Posted By: airic1054
Subject: keyless trunk release problem
Date Posted: September 09, 2007 at 4:52 PM
Hi everyone,
I'm installing a trunk solenoid so the trunk can be popped via remote, but I've run into a snag. In order to get the latch to release, the key must be in the lock. Without the key in, the release lever won't budge. I guess the tumblers inside the lock must be lined up to release. Once the key is inserted, I can move the latch freely (the key does not have to be turned at all).
I've installed trunk solenoids in several cars and have never run into this problem. Can anyone help me out? It's an older car, a '83 Porsche 944. Please let me know if you have any questions.
Thanks in advance!
Eric
Replies:
Posted By: KarTuneMan
Date Posted: September 10, 2007 at 12:21 PM
Is there any way to turn the key to "release" the cylinder to allow the tug of the solenoid? like the cars that have a push button releases that button so you can actually push it. I don't know.....just reaching here....  -------------
Posted By: howie ll
Date Posted: September 10, 2007 at 3:52 PM
Sorry if this is silly but did you push the latch in before testing?
Posted By: airic1054
Date Posted: September 10, 2007 at 9:33 PM
KarTuneMan - I know what you're talking about, but I cannot remove the key in the "turned position."
Howie II - The latches are connected to the lock via rods, if I disconnect the rods, the latches will move freely. So, the problem is the lock mechanism that won't turn unless the key is inserted. I guess I could remove the lock, and just install a swiveling device, but I still want to be able to open the trunk manually with the key.
Maybe I need to take of the device to make it visualizing it easier. Thanks for the ideas so far!
|