viper 3000 door lock polarity?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97011
Printed Date: May 04, 2024 at 9:29 AM

Topic: viper 3000 door lock polarity?

Posted By: ccunni3812
Subject: viper 3000 door lock polarity?
Date Posted: September 10, 2007 at 12:39 AM

Viper 3000 document 1041 references different polarity for the lock output. Both + and - are used depending on what drawing you are looking at, see diagram B and last page "negative door lock outputs".

Is this an error? Any possibility of changing polarity? I did not see any jumpers in the installation guide or 1041 document.

Thanks,

Chris

Replies:

Posted By: ccunni3812
Date Posted: September 10, 2007 at 11:24 AM

Disregard

Print Page | Close Window