peugeot 206 and viper 5002 alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97019
Printed Date: July 12, 2025 at 3:10 PM

Topic: peugeot 206 and viper 5002 alarm

Posted By: tj2220
Subject: peugeot 206 and viper 5002 alarm
Date Posted: September 10, 2007 at 12:36 PM

Hi!

Can anyone tell me how to connect the DEI Viper 5002 alarm to a year 2003 (multiplex) petrol peugeot 206 direction indicators? From the 206 wiring diagram i understood that every indicator is controlled individually by the BSI. So do i have to wire the alarm output to every indicator (possibly with diodes?) or is there a common point to connect to?

Ps. I allready tried to use the hazard warning lights switch like this but it doesn't work because it's a pulse switch. The first ground pulse makes the indicators blink and the second one makes them stop.

Thanks!

Replies:

Posted By: howie ll
Date Posted: September 10, 2007 at 3:49 PM

You can either pick them up in loom to engine bay, make sure you have one of each side, or go to black plug on top of BSI, two of the wires coming out are your left and right indicators, don't ask for colours because you are entering nightmare territory! e.g. right hand indicator is either white or yellow, it's in passenger floor loom but there are EIGHT of that colour! posted_image

Posted By: JWorm
Date Posted: September 10, 2007 at 4:32 PM

howie, empty out your PM box. Its full and I can't reply back to your PM.