DEI554T LCD Remote question
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9705
Printed Date: April 19, 2024 at 8:02 AM
Topic: DEI554T LCD Remote question
Posted By: Maddog3/3ACR
Subject: DEI554T LCD Remote question
Date Posted: February 18, 2003 at 5:02 PM
When my alarm is triggered or remote start is activated, it doesn't show it on the the screen of my remote.
Replies:
Posted By: profuse007
Date Posted: February 18, 2003 at 7:30 PM
are you sure, which way is the alarm trigger? if by door then the door lights up, if the sensor then the hammer comes on. if auto start, then the 3 little smoke cloud comes on.
Posted By: Maddog3/3ACR
Date Posted: February 18, 2003 at 9:19 PM
Yes, I'm sure. None of the two way features work. The remote works, I can arm and disarm the alarm and the remote start works fine. It just doesn't page me when the alarm goes off. Also the tempurature inside the car will not work.
Posted By: Maddog3/3ACR
Date Posted: February 18, 2003 at 9:24 PM
Everything was working fine for the first week until one day i noticed the antenna icon disappeared like i was out of range. I was right next to the car when this happened. Now the unlock icon stays on even when I arm the alarm.
Posted By: securinu
Date Posted: February 18, 2003 at 9:59 PM
should be under warranty. go get a new one
Posted By: crvz
Date Posted: February 18, 2003 at 10:00 PM
I have one of the dei two way remotes, and you have to set it up to recieve two way. it is possible to turn off the recieving signals on the remote. check out the manual and see if you can reset everything. let me know if it works.
Posted By: Maddog3/3ACR
Date Posted: February 18, 2003 at 10:31 PM
I didn't find that part in the manual I have. Do you know how to reset it?
|