scytek 5100rs, 99 ford f-250

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97050
Printed Date: July 07, 2025 at 8:04 PM

Topic: scytek 5100rs, 99 ford f-250

Posted By: number9t
Subject: scytek 5100rs, 99 ford f-250
Date Posted: September 11, 2007 at 10:42 AM

i will be installing a scytek 5100rs in my truck shortly and was wondering if anybody had any lessons learned from previous installs. the truck that it will be going into is a 99 ford F-250 superduty powerstroke diesel with a manual tranny. any pointers on this would be great, thanks

Replies:

Posted By: KarTuneMan
Date Posted: September 11, 2007 at 11:00 AM

bypassing your clutch.

Take the starter wire from your unit directly to the Dk. blue/orange at the clutch switch INSTEAD of the start at the ignition harness.

-------------

Posted By: number9t
Date Posted: September 11, 2007 at 11:02 AM

what will that do for me? thanks

Posted By: russ lund
Date Posted: September 19, 2007 at 12:23 PM

That will get around finding what wire on the clucth assy is needed to get around pressing in the clutch pedal!

-------------
BigDog

Posted By: eric-tech
Date Posted: September 19, 2007 at 12:53 PM

tach - WHITE/ pink - behind cluster

glowplugs - BLACK/ pink - behind cluster

don't forget to hook 2 accesory wires too

posted_image

-------------
Take your time, a solution is just around the corner :-)

Print Page | Close Window