Glow Plug wire
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9712
Printed Date: May 21, 2024 at 7:21 PM
Topic: Glow Plug wire
Posted By: MBS AUDIO
Subject: Glow Plug wire
Date Posted: February 18, 2003 at 6:15 PM
Need to know where to find the glow plug wire in a 1994 GMC fullsize pick-up with the diesel engine. I don't want to take the dash apart to get directly at the light.
Replies:
Posted By: camino
Date Posted: February 25, 2003 at 9:32 PM
if you dont want to do that,install a timer relay to send ground to the glow input of the remote star. adjusted it like a 3 seconds more than the ligth stays on,that way the remote start will wait untill the timer relay send the signal to do the remote start.if you have a more quiestions about this let me know.
Posted By: Haku
Date Posted: February 25, 2003 at 10:18 PM
The dash in that truck is alot easier to take apart then to have problems starting the truck. Not including the extra cost of a timer (if not built in). Its much more reliable, and as stated before in the forum, it is heck on your battery to have both the glow plugs on and starting the vehicle.
-------------
Hak
Siemens Autostart
Posted By: camino
Date Posted: February 26, 2003 at 4:41 PM
either way i just say how he can do it,because he dont want to remove the dash.
|