p2w9000fmr no signal after dead battery

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97390
Printed Date: July 03, 2025 at 6:01 AM

Topic: p2w9000fmr no signal after dead battery

Posted By: garrettbowman
Subject: p2w9000fmr no signal after dead battery
Date Posted: September 24, 2007 at 1:01 PM

Hello,

I have a p2w9000fmr compustar alarm/start combo in my 2003 trailblazer ltz and everything worked fin for over 6 months. I then had a dead battery which was stone dead, i boosted the truck, my alarm chirped for a second and after that my remote couldnt get a signal from the alarm.

I received a new brain under warranty as compustar had said the low voltage damaged the unit. I just installed the brain and I still have no signal. Is it possible the antenna was damaged by the boost?

Replies:

Posted By: garrettbowman
Date Posted: September 24, 2007 at 1:21 PM

Sorry guys, I just programmed to remote and everything is good again.

Print Page | Close Window