Print Page | Close Window

06 mustang reservation mode issues

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97408
Printed Date: October 31, 2024 at 7:07 PM


Topic: 06 mustang reservation mode issues

Posted By: nobrks7
Subject: 06 mustang reservation mode issues
Date Posted: September 24, 2007 at 9:57 PM

Hello, I recently put a 2w900fm compustar in my 2006 mustang and whenever I go to put it in reservation mode,(If you are familiar with compustars this is to ensure the vehicle is not in gear and once the key is removed the vehicle does not shut off til the door is shut) the stereo does not shutoff because the car is still running when I shut the door. Any ideas on how to get around this please let me know. Thanks in advance!



Replies:

Posted By: Velocity Motors
Date Posted: September 24, 2007 at 10:12 PM
Doesn't the radio turn off after about 1 minute ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: nobrks7
Date Posted: September 24, 2007 at 10:27 PM
I think it might... I'll have to test it




Posted By: JWorm
Date Posted: September 25, 2007 at 4:35 PM
I think its closer to 5 minutes.

Your best option is going to be to shut the radio off before getting out of the car. The acc. circuit going to the radio will still be powered for 5 minutes, but it won't create any problems. If you try to pulse a doorpin wire after shutdown you are just going to cancel reservation mode.




Posted By: nobrks7
Date Posted: September 25, 2007 at 6:03 PM
alright thank you




Posted By: moonliter
Date Posted: September 25, 2007 at 7:03 PM

I see a tech tip somewhere, is this going to help

doorpin actually closed when door is closed rest at (-), doorpin opens when door is open, if u use this, u need to change to positive door trigger for the rs

posted_image





Posted By: JWorm
Date Posted: September 25, 2007 at 7:44 PM
I know about that tech tip as well, but I wouldn' be surprised if the original poster used the domelight wire as the door trigger. 2 different methods...but 1 has a lot more wiring than the other.

nobrks7, how did you wire up the door triggers?




Posted By: nobrks7
Date Posted: September 27, 2007 at 6:33 PM
The door triggers work perfectly it is just that to put the alarm in "reservation mode" the car continues running until you shut the doors the accessory switch has power until the doors are closed which causes the radio to never shut off... but like someone said it is not that big of a deal because if I forget to turn it off it will only stay on for about 5 minutes after I get out




Posted By: KarTuneMan
Date Posted: September 29, 2007 at 8:56 AM
I have never seen this problem..... the radio is staying on because an accs. is staying hot?  Retained accs, power.  typically this is fixed by pulsing, or breaking a door pin wire. (simulating opening the door) Can you wire a relay onto the drivers door pin, and "break" it with an arm pulse, or pulse after runtime/shutdown?

-------------




Posted By: xtremej
Date Posted: September 29, 2007 at 10:38 AM
If you pulse it like this it will kill the reservation mode and he wont be able to remote start it. I would just rely on a. shutting the radio off or b. ignore it I doubt it will cause an issue.




Posted By: moonliter
Date Posted: September 29, 2007 at 2:32 PM

not true, it sure works. look carefully, when e-brake is set & u open the drivers door , door trigger turns to pos. after u exit and close the door, door trigger changes to o volt, engine shut, afterwards relay pulls in, bcm senses drivers door open & thus shut down the rap. meantime door trigger input to rs maintains at 0 volt, so reservation mode is maintained. posted_image   or   posted_image





Posted By: moonliter
Date Posted: September 29, 2007 at 3:12 PM

sorry, extremej, i only found out after i posted mine that u were responding to Kart and not mine.

Kartuneman, as my last post explained. you need to hook up with the resistors and diodes like the diagram shown, otherwise i dont know there is any other way ?





Posted By: KarTuneMan
Date Posted: September 30, 2007 at 12:35 AM
moonlifter has it nailed.... I found the same diagram in my Astrochart.

-------------





Print Page | Close Window