drivers unlock priority

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9741
Printed Date: July 17, 2025 at 11:45 PM

Topic: drivers unlock priority

Posted By: sony5689
Subject: drivers unlock priority
Date Posted: February 19, 2003 at 10:11 AM

I have a 1994 Shadow that I am adding door locks to. I have already installed the 850i3. There is the relay bank available from Crimeguard, however, I already have some relays, I just need to know how to wire them. Any suggestions?

Replies:

Posted By: kickyride
Date Posted: February 19, 2003 at 4:13 PM

It's not very difficult. go to this web page. That should be what you need. You'll use your unlock #1 pulse to unlock the driver's door and your unlock #2 pulse for the rest. Hope this helps. posted_image

-------------
Mike
Sales/Tech Support - KICKYRIDEoCOM mobile electronics
MECP 1st class-Security Specialist

Posted By: sony5689
Date Posted: February 19, 2003 at 6:33 PM

Thanks for the help. However, I'm not sure where the violet and grey wires go. Also, How do I hook up the wires coming off posts 87a and 30? Thanks again!! posted_image

Print Page | Close Window