Print Page | Close Window

pro start 2300 need horn beep

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97439
Printed Date: July 07, 2025 at 5:31 AM


Topic: pro start 2300 need horn beep

Posted By: flashbang
Subject: pro start 2300 need horn beep
Date Posted: September 25, 2007 at 8:01 PM

I have a AMENITY Pro-start 2300 with the JDL-PK in my '02 Jeep grand cherokee.
It remote starts with parking lights steady on, but no horn chirp when starting. How can I make this happen?
Also when it shuts down after a remote start the doors all lock, very annoying, anyway to resolve the two problems?
Thanks



Replies:

Posted By: KarTuneMan
Date Posted: October 04, 2007 at 7:15 PM

The locks, locking, is a safety feature. Why do you want the doors left unlocked after runtime?

This can more than likely be programmed out.

Is the horn honking upon remote starting an option? If it is, connect the horn output to the grey/orange at the column. Gray plug next to airbag plug.



-------------



Posted By: flashbang
Date Posted: October 05, 2007 at 5:47 AM
I can not find anything in the manual for the horn option.
https://www.commandoalarms.com/2300manual.pdf


Print Page | Close Window