pro start 2300 trigger wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97468
Printed Date: July 06, 2025 at 5:16 AM

Topic: pro start 2300 trigger wire

Posted By: flashbang
Subject: pro start 2300 trigger wire
Date Posted: September 26, 2007 at 8:16 PM

When I ground the pro-start 2300 trigger wire it starts fine. Now how do I get a negitive pluse from my OEM 2002 Jeep Grand Cherokee key fob Panic button to operate this remote starter?
I tested the wires comming form the remote key module in the passenger door panel with no luck?

Replies:

Posted By: i am an idiot
Date Posted: October 01, 2007 at 7:00 PM

I am not at all familiar with your start module. Or your vehicle for that matter. Can you select 1 2 or 3 pulses to activate it. If so we set them to 3 pulse and press lock 3 times on the keyfob. You may need to use a relay at the actuator motor to get you the ground pulse you need.

Print Page | Close Window