99 F250 diesel, python 990

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97470
Printed Date: May 16, 2025 at 6:32 PM

Topic: 99 F250 diesel, python 990

Posted By: fords4life
Subject: 99 F250 diesel, python 990
Date Posted: September 26, 2007 at 9:09 PM

I just picked up a Python 990 for my 99 F250 (diesel). I am crazy to try and do it myself? It looks a little intimidating with the amount of wires but is it easier than it looks? Are any of the diodes or resistors required? If I take it somewhere to get it installed, what should I expect to pay? I'm located in San Diego CA if anyone wants to help out....

Nathan

Replies:

Posted By: fords4life
Date Posted: September 26, 2007 at 9:38 PM

Forgot to add that the truck has factory keyless entry.

Posted By: KarTuneMan
Date Posted: September 26, 2007 at 10:12 PM

If you have ANY experiance at all, you'll manage. It's a tight squeeze to work in though.

If you DON"T have an time under your belt.........well...... Consider your time, whats it actually worth?

-------------

Posted By: fords4life
Date Posted: September 26, 2007 at 10:35 PM

Never installed an alarm before. If it's a matter of just tracing down wires and making connections, I shouldn't have a problem with that. I browsed through the install guide and it looks as though the only diode needed is for the wire coming from the "wait to start" light. Is this the only one?

Print Page | Close Window