95 mazda rx7 central locking
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97529
Printed Date: May 22, 2024 at 10:42 PM
Topic: 95 mazda rx7 central locking
Posted By: eireal
Subject: 95 mazda rx7 central locking
Date Posted: September 29, 2007 at 2:14 PM
Guys
Working on a 1995 mazda rx7 (JDM import)with an arrow 5 alarm.
Regarding the central locking,it seems to use a cable instead of a rod and no visable motor.Pulling the cable locks/unlocks both doors.
I've got 5 wires coming from a loom at the cable,2 ground,1 constant 12v and 1 wire 12v on open 1 wire 12v on lock.
Does this have to be wired to reversed polarity to work or is an actuator needed for sure?
Replies:
Posted By: howie ll
Date Posted: September 29, 2007 at 4:52 PM
I think you should pay me for all this advice but here we go:-Some had a factory keyless entry, most didn't if it has keyless entry, find the control unit * and do a motor interrupt AKA 5wire on the lock wires. If not actuator in driver's door, the cable part ends just before the lock unlock pull. VERY carefully fix your linkage there ensuring the actuator is also in the pull housing = short linkage , this lets the door panel cover it and yes this wil give you a bad back.
Posted By: howie ll
Date Posted: September 29, 2007 at 4:53 PM
* PS If it one of the rear ones with keyless entry it's in the driver kickwell
Posted By: eireal
Date Posted: September 30, 2007 at 6:26 AM
Thanks Howie your a great help.
I couldn't find any sign of a control unit so i presume it didnt have keyless entry.I've already gotten the bad back,absolutely horrible car to work on in terms of space.
Thanks again
Posted By: kola7126
Date Posted: September 30, 2007 at 4:02 PM
MAZDA | MODEL | YEAR(S) | | RX-7 | 1993 -1996 |
| POWER LOCK | ADD ACTUATOR, See NOTE *1 |
| POWER UNLOCK | ADD ACTUATOR, See NOTE *1 |
| NOTES | | NOTE *1 the FACTORY DOOR LOCK SYSTEM is a CENTRAL DOOR LOCK TYPE, to add KEYLESS ENTRY to this system will require the adding of a DOOR LOCK ACTUATOR Part #742, soem units will also require additional relays part #775, to connect |
|