i lost my 2 way pager in house?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97550
Printed Date: May 14, 2025 at 2:40 PM

Topic: i lost my 2 way pager in house?

Posted By: legend1011
Subject: i lost my 2 way pager in house?
Date Posted: September 30, 2007 at 10:36 AM

I know this is a really silly question, but I was wondering if you guys can help me. I have a Viper 71xv Car alarm installed in my car. My parants had tons of boxes in my house (we have doing alot of yard sales) and I think it might have accidently been placed in one of alot. Is there a way to find the pager by paging it somehow? My car unfortunately was left unarmed so I can't simply set off the car and listen for the page. I tryed using the Valet Button to set my car to passive arming, but I can't do this because it requires the alarm. Is there any way to arm the car manually? I really want to find this thing.

THanks so much

Replies:

Posted By: enice
Date Posted: September 30, 2007 at 10:40 AM

if you know a dealer who has a bitwriter they can do it with that. Or you can buy another remote

Posted By: harrisell1
Date Posted: October 16, 2007 at 6:23 PM

Don't you have two remotes anyway? If so set your alarm with your other remote, make it go off and listen for your pager remote.

-------------
electronics

Posted By: tedmond
Date Posted: October 16, 2007 at 6:32 PM

dont you have the "contact driver" or "knock pad" usully its built into the antenna. just hit that a few times, and it should page your controll. on vipers im not sure if the system has to be armed. on compustar, you can just knock and it will page the control.