96 integra, viper 791xv remote start?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97556
Printed Date: May 15, 2025 at 2:50 AM

Topic: 96 integra, viper 791xv remote start?

Posted By: takata_eightsix
Subject: 96 integra, viper 791xv remote start?
Date Posted: September 30, 2007 at 5:02 PM

the shop install the alarm. 2 month later they went out of business... So I cant get my remote start to get hook up...

it's a viper model 791xv...

on the primary harness (h1) wire connection guide...

it said RED / white......................(-) 200 mA Channel 2 validity output

all the rest of the wire is one except for this one... I got it to bypass the clutch but it wont start...

Replies:

Posted By: takata_eightsix
Date Posted: September 30, 2007 at 5:08 PM

https://www.directechs.com/guides/manuals/ig/viper/N564V_6-03.pdf

this is the wiring diagram...

Posted By: enice
Date Posted: September 30, 2007 at 5:12 PM

I don't think you'll get any help because its a 791xv and its on a manual transmission vehicle. You must get a 689m to work propery for the remote start or you'll get no help.

Posted By: howie ll
Date Posted: September 30, 2007 at 5:14 PM

DEI won't touch it without that accessory, enice (The Honda King) is spot on.

Posted By: takata_eightsix
Date Posted: September 30, 2007 at 5:30 PM

so I hook up that wire( RED / white) to the 689???

Posted By: enice
Date Posted: September 30, 2007 at 6:53 PM

Get the module first and then we'll be able to help you with that. I promise. Remember its a 689m DEI module

Posted By: KarTuneMan
Date Posted: September 30, 2007 at 8:52 PM

I thought the 689m was the elusive (can't get in the USA) part?

-------------

Posted By: enice
Date Posted: September 30, 2007 at 9:32 PM

The manual just got released on directechs. I was suppose to get the pricing last week.

Posted By: howie ll
Date Posted: October 01, 2007 at 1:08 AM

Anyone want an MTN1, I haven't had to try it yet, I just sell back to Clifford with I/Start V posted_image

Posted By: profuse007
Date Posted: October 03, 2007 at 3:46 PM

Finally it came out.

I have been watching for the NSS module to come out and it has been released.

Link to 689m install guide

Definitely get a NSS module for that 'teg.

It looks like DEI is just marketting this module, not the maker.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).