’08 ridgeline cs2016dpii

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97587
Printed Date: May 29, 2024 at 5:25 AM

Topic: ’08 ridgeline cs2016dpii

Posted By: michael101
Subject: ’08 ridgeline cs2016dpii
Date Posted: October 01, 2007 at 2:39 PM

I'm am a DIY'er looking for a little help.

Installing Crimestopper CS2016 DPII-FM along with Honda-SL3 and CAN-SL2. I have put together a wiring diagram for the install and would like for someone to check and correct me if needed. I have the diagram in .pdf format and can email. Thanks in advance.

Replies:

Posted By: usabuilt
Date Posted: October 01, 2007 at 2:49 PM

you want this for FREE? 2008 Ridgeline, aren't these trucks worth over 30 grand? you should take it to a pro if your not experienced..Just my opinon of course.

Posted By: michael101
Date Posted: October 01, 2007 at 2:54 PM

Not sure what the cost of my truck has to do with it but.....thanks for your opinion.

I do this kind of stuff because I enjoy it, not to screw anyone over.

Posted By: Chris Luongo
Date Posted: October 02, 2007 at 4:35 PM

I'd be happy to look at it. CLuongo603@aol.com.

P.S. Please use my email only to send me the PDF file. I will make any comments/suggestions here in the forum.

Posted By: michael101
Date Posted: October 03, 2007 at 8:46 AM

Thanks Chris. I emailed to you this morning. I'd be happy to fix anything you suggest, maybe it'll be usefull to you/others.

One thing I've run across.The Fortin Electronic literature does not give a specific method for programming the SL2 and SL3 Modules when connected in series via data port. I'm not sure if this is an issue or not.

I didn't find 2008 specific wiring inforation for my vehicle anywhere so I took the time to verify all power wires were the same as earlier models.

The wiring on the diagram that is shown as solid lines is what I have wired in my vehicle so far.