Print Page | Close Window

92 s10, door lock wires, which ones?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97651
Printed Date: May 13, 2024 at 10:23 PM


Topic: 92 s10, door lock wires, which ones?

Posted By: mbfjr
Subject: 92 s10, door lock wires, which ones?
Date Posted: October 03, 2007 at 3:09 PM

I just bought this keyless entry system  https://alarmsellout.com/support/f-820-manual.pdf  and I am trying to install it in a 1992 Chevy S10 Pickup.  All I want is the keyless entry and light flash. There are no  instructions, only the diagram above. I found the wiring diagram for the truck here, but which wires go where?

Thanks




Replies:

Posted By: kola7126
Date Posted: October 03, 2007 at 6:03 PM
 MODEL YEAR(S)
 S-10 PICKUP  1987 -1994
 12 VOLT CONSTANT  RED (+)   IGNITION SWITCH HARNES
 DOOR TRIGGER WHITE (-)  @ UNDER DASH LIGHT
 PARKING LIGHTS ( + ) BROWN (+)  @ HEADLIGHT SWITCH or in DRIVERS KICK PANEL   
 POWER LOCK LIGHT BLUE (TYPE C)  IN DRIVERS KICK PANEL   
 POWER UNLOCK BLACK/ WHITE (TYPE C)  IN DRIVERS KICK PANEL



Posted By: mbfjr
Date Posted: October 03, 2007 at 7:28 PM
Well I've located the light blue and BLACK/ white wires in the drivers kick panel, but now how do you determine which wires from the head unit connect to these wires? The diagram above doesnt really tell me what color wire to connect to themposted_image



Posted By: moonliter
Date Posted: October 03, 2007 at 8:13 PM

i always cut the wires, then test with meter to see which end is the power source when you hit the lock or unlock button,

i look at your keyless module, use the diagram B, up is unlock down is lock


Print Page | Close Window