not giving up viper remote when servicing

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97664
Printed Date: May 08, 2024 at 10:16 PM

Topic: not giving up viper remote when servicing

Posted By: sufferrar
Subject: not giving up viper remote when servicing
Date Posted: October 04, 2007 at 6:45 AM

Got a nissan 2004 wingroad with a viper 5900. Car also came with nissan intelligent key so i can lock/unlock and start the car just using the intelligent card.
I need to send the car to do a paint repair on the door but don't want to give the remote for the viper with the painter man. I just want to give him the intelligent card.
If i put the alarm in valet mode will that disable the passive arming and the forced arming?

-------------
"I'm So Loud It Hertz"

Replies:

Posted By: enice
Date Posted: October 04, 2007 at 10:05 AM

Just go to the settings and turn off passive arming and thats it problem solved. When you get the vehicle back you can change it back.

Posted By: JWorm
Date Posted: October 04, 2007 at 6:36 PM

Just put it in valet mode. That is what it is for.

Posted By: sufferrar
Date Posted: October 05, 2007 at 6:53 AM

I put it in valet mode last night and it seem to be doing what i want.
I droped the car off this morning and i should get it back this evening.
Thanks everyone

-------------
"I'm So Loud It Hertz"

Print Page | Close Window