honda e.passenger side only unlock wire
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97747
Printed Date: July 15, 2025 at 7:55 AM
Topic: honda e.passenger side only unlock wire
Posted By: Tat2sink
Subject: honda e.passenger side only unlock wire
Date Posted: October 07, 2007 at 12:30 AM
Hey there guys,I'm in the process of finishing up the remote starter/two way security system install on my 03'Honda Element,and in order for me to get the drivers priority lock feature to work,the units install manual(Scytek Galaxy 5100RS)says I need to connect it's (-)500mA output wire to a relay to unlock the passenger door,when system is configured for drivers priority unlocking.My question is,does anyone know where the easiest/best location I could find to trigger only the passengers door unlock with my negatively triggered relay.Also since the factory keyless entry has the drivers priority feature,can I simply find this wire in that factory keyless entry plug,or will I need to tap into the wires elsewhere?
Thanks alot.
Replies:
Posted By: howie ll
Date Posted: October 07, 2007 at 3:47 AM
Motor lock wire going to passenger kickwell, PROBABLE (not sure, going on UK colours) colour WHITE/ Red. Take pulse from alarm to 85, 12v+ @ 7:5amp fused to 86 and 87, feed from interior to 87a and output to door from 30.
Posted By: howie ll
Date Posted: October 07, 2007 at 3:48 AM
PS I'm a fool didn't read properly; UNLOCK wire should be Yell/Red rest stays the same.
Posted By: Tat2sink
Date Posted: October 07, 2007 at 11:21 AM
Thanks alot,I'll try that. 
Posted By: Tat2sink
Date Posted: October 08, 2007 at 5:18 PM
I got wired up correctly,thanks again. 
|