97 jimmy, astrostart 803
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97876
Printed Date: April 30, 2024 at 3:50 PM
Topic: 97 jimmy, astrostart 803
Posted By: mrmohawk
Subject: 97 jimmy, astrostart 803
Date Posted: October 11, 2007 at 11:58 AM
i have a 97 jimmy with a astrostart 803. remote starter has always workd but now when i hit the start button it cranks and everything but it doesnt fire. it used to sound like the fuel pump was priming but it doesnt do that any more.after the starter shuts off the led blinks 4 times if that means anything to anyone. no biggy just nice to have when winter rolls around
Replies:
Posted By: usabuilt
Date Posted: October 11, 2007 at 12:13 PM
No tach signal..
Posted By: mrmohawk
Date Posted: November 28, 2007 at 11:22 AM
i know there is no tach signal but it is wired to the coil and the instller never put a fuse in there. The wire still looks good do you think it fried it? i cand see why it wouldnt work
Posted By: *theone*
Date Posted: November 28, 2007 at 3:10 PM
have you tried to reprogram the tach? You can either have the unit auto learn the tach or do it manually. For auto (first start the vehicle with the key and let it warm up) put dip switches 1,5,6,7 up, then hold brake pedal down until led starts flashing. For manual 6cyl dip switches 1,5,6 up hit the brakes. If it's 8 cyl dip switches 1,7 up, then brakes. Remember to put all dip switches back down after programming.
Hope that helps.
Ryan
|