dei 3500 programming

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97932
Printed Date: May 17, 2024 at 5:13 PM

Topic: dei 3500 programming

Posted By: tfindley
Subject: dei 3500 programming
Date Posted: October 13, 2007 at 12:22 PM

I just bought an '04 Mazda 6 with a remote start system. Everything seem to work okay except I'm not getting any audible indicators, just the usual parking light flashing. The remote is a 4 button "Clifford" and the module has "Directed Electronics Inc" on one side and "3500" on the other side. I found an owner's manual online for a Sidewinder 3500 ESP and although the manual is pretty vaque, that seems to be pretty close. What I'm looking for is an install / programming manual. I want to change the runtime and connect the system to the horn. Also, I'm not sure if this system also doubles as an alarm or not. If so I would like to put in a siren.

Thanks,

Tom

Replies:

Posted By: Twelvoltz
Date Posted: October 13, 2007 at 5:14 PM

That sounds to me as if you have the Sidewinder 3500ESP with a Clifford remote programmed to it. DEI contacted me specifically and told me that posting manuals is a direct violation of their policies so I can no longer post any manuals. Maybe someone else can post the manual for you.

-------------
Installer, IT support, and FFL. I need less hobbies.

Posted By: perly
Date Posted: October 14, 2007 at 7:10 PM

well I am not familiar with your exact model and I do not have an install manual for it myself I did find this one on the net. There is no way to tell for sure it it is the right one but hopefully it is. Anyways here it is.

DEI doe not scare me! Click here