2007 ford ranger keyless entry

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98037
Printed Date: April 28, 2024 at 9:09 PM

Topic: 2007 ford ranger keyless entry

Posted By: gregmeisman
Subject: 2007 ford ranger keyless entry
Date Posted: October 16, 2007 at 9:27 PM

Does anyone know the wiring color code and location of the oem keyless entry module on a 2007 Ford Ranger supercab? Thanks

-------------
Greg

Replies:

Posted By: Velocity Motors
Date Posted: October 16, 2007 at 9:48 PM

LOCK (-) Violet/gray UNLOCK (-) Gray / YELLOW

In Gray and Black connector above handbrake near firewall

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: gregmeisman
Date Posted: October 17, 2007 at 7:29 PM

Those are for the switch trigger and I would like to find the wires for the driver door lock motor, so that I can maintain the driver door priority when I install my alarm.

-------------
Greg

Posted By: KarTuneMan
Date Posted: October 17, 2007 at 7:42 PM

Drivers unlock ONLY is blue/green reverse polarity. Found in the same plug with the all lock/unlock wires.

Wire a relay for rev. pol. and use the main unlock out from your unit to trigger, use the second unlock to do the other.

-------------

Posted By: gregmeisman
Date Posted: October 18, 2007 at 8:48 AM

Thanks, that's just what I needed

-------------
Greg

Print Page | Close Window