Print Page | Close Window

door triggers

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9810
Printed Date: July 20, 2025 at 5:33 PM


Topic: door triggers

Posted By: dyer
Subject: door triggers
Date Posted: February 20, 2003 at 3:47 PM

I have a 2003 f-250. It does not have factory keyless entry or alarm (weird I know). Some people are telling me that I have to tie into each individual door for the door driggers. Is this true? Shouldn't there be a common wire fo all four? Any help would be great!



Replies:

Posted By: brianh
Date Posted: February 20, 2003 at 3:55 PM
The reason you need to find the seperate door triggers is because of the dome light delay feature. If you want a common wire for both doors use the (+)side of any courtesy light under the dash. Im thinking its a BLACK/ blue wire. Be sure to use the (+) door trigger wire from the alarm. Double check the wire with a meter to confirm. Good luck with this. Brian




Posted By: dyer
Date Posted: February 20, 2003 at 4:15 PM
I'm not sure that this matters, but the truck is 4 drs. So your saying that I can just tie into any courtesy light? That makes sense.





Print Page | Close Window