Print Page | Close Window

compustar p2w900fmas keyfob issues

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98105
Printed Date: May 20, 2025 at 10:50 AM


Topic: compustar p2w900fmas keyfob issues

Posted By: edan
Subject: compustar p2w900fmas keyfob issues
Date Posted: October 19, 2007 at 7:52 AM

I recently got a Compustar p2w900fmas installed, and am experiencing a strange issue. When still close to the car (i.e. within 100 ft or so), my 'Query' button no longer works. I push it , but it isn't receiving any data, like it's out of range. However, if I send a lock/unlock command, I will get confirmation that it went through, and after doing this, my query button will work

The shop didn't think anything was wrong, but the manual specifically states that if you want to see if you are still in range, use the Query button. Does anyone know what's going on? Thanks!



Replies:

Posted By: xtremej
Date Posted: October 19, 2007 at 9:57 AM
Tell them to swap your remote. It should work without having to unlock or lock.


Print Page | Close Window