2001 ford taurus bypass problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98143
Printed Date: May 15, 2025 at 6:23 PM

Topic: 2001 ford taurus bypass problem

Posted By: Autosexual
Subject: 2001 ford taurus bypass problem
Date Posted: October 20, 2007 at 6:09 PM

I hope someone can help, I have to fix this fast.

I installed a DEI RS and I used a DEI 1100f bypass. I hooked up all the wires for the bypass, Programed it and the RS worked fine, then I unplugged it so I could solder the connections. Then I plugged the bypass back up and reset it , but when I was reprogramming put in the first key got the green light put in the 2nd key and pressing the program button on the bypass and then when I would go to RS it would crank but it would not turn over.

Does any one know how to solve this problem ?

Replies:

Posted By: Autosexual
Date Posted: October 20, 2007 at 8:00 PM

does anyone know if it is true that you can only program 10 keys off of the ford Taurus key cylinder?

Posted By: Autosexual
Date Posted: December 12, 2007 at 4:25 PM

OK i found out the answer to my questions.

Yes it is true you can only program a 6 to 8 keys for the Fords and after that you have to clear them out and then you start fresh and can program another 6 to 8 keys.