Print Page | Close Window

panic alarm set off

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98144
Printed Date: May 15, 2025 at 2:35 PM


Topic: panic alarm set off

Posted By: dezracer
Subject: panic alarm set off
Date Posted: October 20, 2007 at 7:11 PM

2001 chevy silverado 2500hd put a remote start avital 4100 with 1700G sometime when i use the 4100's remote to unlock the doors it set off the oem panic alarm it doesn't do it with any regular pattern any help thanks!!! Scott




Replies:

Posted By: techman93
Date Posted: October 20, 2007 at 11:47 PM
Did you tap into alarm disarm wire?
|FACTORY ALARM DISARM |light green            |-|drivers kick *4             |*4 Also found in the purple plug of the BCM.



Posted By: dezracer
Date Posted: October 21, 2007 at 11:36 AM
No I didn't hook it up to the factroy alarm don't think it has one? just the panic alarm. I did hook it up to the after market alarm so it would allow remote start. Would the lt green wire be the same? Also on the 1700g has a lead to hook up to the panic alarm were do you find this wire? Thanks for all the help!!!



Posted By: techman93
Date Posted: October 21, 2007 at 11:37 AM
What kind of after market alarm does it have? If it has both you need to make sure you are hooking up so the OEM alarm and after market know not to false alarm.



Posted By: dezracer
Date Posted: October 21, 2007 at 12:11 PM
Its a commando dl100 I have the disarm hooked up to it. The truck didn't have an factory alarm just that panic alarm that operates with the original remote. The 1700G has a wire for (-) panic input connect this wire to  the auxiliary channel output from the alarm system to use the vehicles factory panic alarm???


Print Page | Close Window