power from a g6 for alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98166
Printed Date: May 17, 2024 at 6:28 PM
Topic: power from a g6 for alarm
Posted By: losboricua
Subject: power from a g6 for alarm
Date Posted: October 21, 2007 at 12:07 PM
I was wondering which power wire you guys/gals use for powering an alarm and all of it components. this would be for a 2006 g6 basic model.
thanks
carlos
-------------
2015 Hyundai Genesis Ultimate Black on Black
Tinted Windows, Fogs, Roof Spoiler, ARK Springs, Ruff R1 20's Staggered
Replies:
Posted By: Velocity Motors
Date Posted: October 21, 2007 at 12:41 PM
For remote starters it is suggested to run power to the fusebox (pass. Side of center console) or to the battery. Use the RED / WHITE at the ignition switch for low current devices such as modules only.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: losboricua
Date Posted: November 02, 2007 at 12:03 PM
which wire is the input wire in the fuse box? there is a red and black stripe wire but it is only like a 14ga cable. i can see to find which one is the one straight from the battery. which plug inn the fuse box is it going to be??
-------------
2015 Hyundai Genesis Ultimate Black on Black
Tinted Windows, Fogs, Roof Spoiler, ARK Springs, Ruff R1 20's Staggered
|