ca 670 transmitter programming?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98176
Printed Date: May 12, 2025 at 5:46 PM

Topic: ca 670 transmitter programming?

Posted By: dustindiesel
Subject: ca 670 transmitter programming?
Date Posted: October 21, 2007 at 6:48 PM

how do u program the transmitter to the system w/o an RF programmer??

thanks

dustin

Replies:

Posted By: dustindiesel
Date Posted: October 21, 2007 at 7:06 PM

i hold the valet button and it turns solid blue but no chirps or sounds coming from siren indicating programming mode??

i have a 2003 f250 diesel if u need to know....

Posted By: dustindiesel
Date Posted: October 21, 2007 at 7:30 PM

NVM i got it....

Posted By: Twelvoltz
Date Posted: October 21, 2007 at 10:07 PM

dustindiesel wrote:

NVM i got it....

Please post how you "got it" so that if anyone in the future has the same problem they can get the answer from this thread.

-------------
Installer, IT support, and FFL. I need less hobbies.

Posted By: dustindiesel
Date Posted: October 21, 2007 at 11:12 PM

sry...its in the install manual its just after the section on using the RF programmer.

turn key on, keep a door open and press and hold valet over ride for 10secs then siren will sound 3 times, press lock button on all remotes being programmed and then u can follow the rest of the options through blinks of the led and choosing diff options..great alarm.im very happ so far

Print Page | Close Window