Print Page | Close Window

UNGO ms2007 radar sensor install

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9819
Printed Date: July 20, 2025 at 12:17 PM


Topic: UNGO ms2007 radar sensor install

Posted By: N1njaTurt1e
Subject: UNGO ms2007 radar sensor install
Date Posted: February 20, 2003 at 6:12 PM

I recently bought an UNGO ms2007 security system for my car.  I also bought a radar sensor to go with the basic system. I was wondering if anyone had suggestions on how to hook-up the radar sensor to the system. I heard something about using diodes, does anyone know anything about this. Just in case it helps, I have a 99 Mercury Cougar. Thanks!



Replies:

Posted By: Velocity Motors
Date Posted: February 20, 2003 at 9:13 PM
You can wire in the trigger system to either the impact sensor ( if it has an external impact trigger wire ) or one of the door or hood triggers. Use a diode to isolate the sensor from the trigger wire that you are attaching it to. Have the cathode band facing the trigger wire if (-) trigger .

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: N1njaTurt1e
Date Posted: February 21, 2003 at 1:10 PM

Thanks for the info, I finally got my system today and I am planning on installing it next weekend. If I have any trouble I will put up another post.




Posted By: ncollini
Date Posted: April 26, 2003 at 1:27 PM

Velocity, should the cathode band be facing the trigger wire on both the green and blue wires?, Do I need a diode for each sensor or just the proximity sensor?

Thanks



-------------


Print Page | Close Window