window module roll up only

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98208
Printed Date: May 15, 2025 at 8:39 AM

Topic: window module roll up only

Posted By: jbuenojr
Subject: window module roll up only
Date Posted: October 22, 2007 at 1:42 PM

hey there can anyone help me out .

i have hook up a window module to my alarm (crime stopper).

But i cant get the module to roll up my windows using the alarm.

i know you need to apply ground to the orange wire form the module to get the windows to roll up.

does any one know how to wire a relay using the starter kill from the alarm (aka orange wire) and still use starter kill too.?

thanks

johnny

Replies:

Posted By: Twelvoltz
Date Posted: October 22, 2007 at 2:32 PM

Please post the Make/Model/Year of vehicle as well as the make and model of alarm system and window roll up module.

You can trigger multiple outputs with the ground when armed output using diodes. Here is a very good description of diodes and their uses.

-------------
Installer, IT support, and FFL. I need less hobbies.

Posted By: jbuenojr
Date Posted: October 24, 2007 at 4:17 AM

i am using a pthyon 460 hp alarm with a generic window module.

the car is toyota corllora 03 4 door

Print Page | Close Window