bmw 530i 2004 e60 central locking
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98248
Printed Date: May 12, 2025 at 5:15 PM
Topic: bmw 530i 2004 e60 central locking
Posted By: sova
Subject: bmw 530i 2004 e60 central locking
Date Posted: October 23, 2007 at 2:32 PM
Good day.
need central locking wiring diagram for this car.
thanks
Replies:
Posted By: Twelvoltz
Date Posted: October 23, 2007 at 3:15 PM
Audiovox lists:
Power Unlock BLACK/ WHITE (+) IN DRIVERS DOOR AT SWITCH
Power Lock BLUE/RED (+) IN DRIVERS DOOR AT SWITCH
They also list this note:
THESE WIRES DONOT FUNCTION WHILE THE CAR IS RUNNING. YOU MUST ALSO CONNECT TO THE YELLOW/RED WIRE AT THE COURTESY DOORLOCK SWITCH IN THE CENTER CONSOLE. A GROUND PULSE TO THIS WIRE WILL SIMULTANEOUSLY LOCK AND UNLOCK THE DOORS
Hope it helps.
-------------
Installer, IT support, and FFL. I need less hobbies.
Posted By: sova
Date Posted: October 24, 2007 at 8:10 AM
These wires for E39 .
E60 - seven wires in the driver’s door lock module connector.
Two wires – motor lock\unlock
One wire – door light switch
Brown – ground.
Black\yellow - ? 0V
Blue\red - ? 0V when rest , +9V when turning key to lock or unlock.
Yellow\? (don’t remember stripe) – 0V when rest, switching +10V when turning key to lock or unlock and 0V after few minutes.
Posted By: howie ll
Date Posted: October 24, 2007 at 10:51 AM
Sova, not the lock module, it's a plug on the switch.
Posted By: kola7126
Date Posted: October 24, 2007 at 5:26 PM
Adapter CAN is necessary for connection
|