how to disarm via valet switch.

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98288
Printed Date: May 13, 2025 at 3:58 PM

Topic: how to disarm via valet switch.

Posted By: creed2k
Subject: how to disarm via valet switch.
Date Posted: October 24, 2007 at 3:14 PM

Its a viper 5900... and i sometimes need to be able to get into the car without the viper remote so i have to use my key in the door, first off i am assuming that WILL set off the alarm right? and also how exactly do i use the valet switch to disarm it after the door is opened?

Replies:

Posted By: creed2k
Date Posted: October 24, 2007 at 3:41 PM

ok it looks like u just turn the igition on then press the valet the preset number of times and it shuts off after 5 seconds. Now the question is how do i preset the number of presses? in the manual it says the default is one, but then the 2nd option is 2-5 so how can u get a number between 2 and 5? here is a pic of what i am saying from the manual.

Posted By: howie ll
Date Posted: October 24, 2007 at 4:11 PM

Either read the manual 20 times and it still doesn't work OR borrow a bitwriter.

Posted By: Twelvoltz
Date Posted: October 24, 2007 at 5:02 PM

howie ll wrote:

Either read the manual 20 times and it still doesn't work OR borrow a bitwriter.

The DEI programming instructions can be vague at best. Open a door then turn your ignition on then off. Press and hold the programming button until the siren chirps twice. Release and press the programming button 5 times holding it in on the 5th press the siren will chirp 4 times. Continue holding the programming button and press unlock on the transmitter until the siren chirps the number of times you want your valet switch set to.

-------------
Installer, IT support, and FFL. I need less hobbies.

Posted By: creed2k
Date Posted: October 24, 2007 at 9:38 PM

Great info twelvolts, thanks for the help! posted_image