561r to aps596 troubles
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98289
Printed Date: May 01, 2024 at 7:21 PM
Topic: 561r to aps596 troubles
Posted By: xtac1080
Subject: 561r to aps596 troubles
Date Posted: October 24, 2007 at 4:36 PM
I recently added a 561R to a 1999 Chevy S10 which already had an APS596 installed. I got everything to work EXCEPT that after I remote start the unit with the APS 2-way remote, I cannot shut it down using the same function. I have set the 561R to one pulse activation. It seems that the AUX channel 3 on the APS is going dead once the vehicle is running. Anyone have any ideas?
Replies:
Posted By: xtac1080
Date Posted: October 24, 2007 at 4:38 PM
I can take a ground wire and tap the activation wire once and it will shut down, but the AUX3 no longer will send a ground pulse once the car is running.
Posted By: Twelvoltz
Date Posted: October 24, 2007 at 4:51 PM
Did you use the dark blue/black trace wire or the dark blue wire? I am not really a Audiovox person but according to the manual they recommend using the dk blue/black for activating a RS.
I would have to think that the output of the dark blue wire is turned off when the ignition is energized.
-------------
Installer, IT support, and FFL. I need less hobbies.
|