clifford led compatibility

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98376
Printed Date: July 03, 2025 at 6:12 AM

Topic: clifford led compatibility

Posted By: mrspeaker
Subject: clifford led compatibility
Date Posted: October 27, 2007 at 9:13 PM

Hi,I have a crimestopper cs2000 and I want to change the led to the clifford G5 led..The standard led is 2volt,but i need to know what the voltage is on the clifford led and if it will work with my system without being dim

here is a picture for reference of the led im reffereing to https://i17.ebayimg.com/03/i/000/bd/e7/cfe7_1_sbl.JPG

Replies:

Posted By: techman93
Date Posted: October 28, 2007 at 12:29 AM

Most LED's are in the 2-3 volt range. I would bet that 2 volt should be enough.

Print Page | Close Window