06 suburu forester, ultrastart 3500 problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98391
Printed Date: May 01, 2024 at 8:25 PM

Topic: 06 suburu forester, ultrastart 3500 problem

Posted By: ck auto
Subject: 06 suburu forester, ultrastart 3500 problem
Date Posted: October 28, 2007 at 11:31 AM

did rs in 06 suburu forester soldered onto keyless remote to get arm disarm everything works fine except the lock output is too long triggering the panic unit is old ultrastart 3500 it was for friend any ideas how to shorten pulse they are relayed tried different programming tech support gave me the standard reset and reprogram answer

-------------
good luck
kirk

Replies:

Posted By: KarTuneMan
Date Posted: October 29, 2007 at 6:25 PM

Well.... the default is .75 seconds. Is it longer than that? The other setting is 3.0 seconds... thats a long time?

Heres the install manual.

Posted By: ck auto
Date Posted: October 29, 2007 at 6:47 PM

tried double unlock setting as well as single unlock both with same result of a good 2 second count on lock pulse can you think of what could be back feeding to keep pulse on i thought maybe field collapsing on relay coil but its the same with relays disconnected

-------------
good luck
kirk

Print Page | Close Window