2007 wrangler, remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98394
Printed Date: July 19, 2025 at 10:20 AM
Topic: 2007 wrangler, remote start
Posted By: kmitchell
Subject: 2007 wrangler, remote start
Date Posted: October 28, 2007 at 2:45 PM
anyone know how to wire up the relays for remote start cant get dei document 1084
-------------
kevin mitchell
Replies:
Posted By: Velocity Motors
Date Posted: October 28, 2007 at 3:27 PM
Kevin, just use a bypass module that does the resistor 2nd start/ACC bypass for you. PATS-CHRYSLER04+ or the iDatalink ADS-TBCH-C2 will do the trick.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: kmitchell
Date Posted: October 29, 2007 at 8:07 PM
thank you
-------------
kevin mitchell
Posted By: fcss
Date Posted: November 02, 2007 at 7:10 PM
velocity motors is right the Idata link peice is great I use them all the time but I have a different part number I dont know if this is an older part number or not but we use the ads-tbsl c2
Posted By: extreme1
Date Posted: November 02, 2007 at 7:38 PM
ads-al-ca + ads-rngc2 is the combo I use on all new chrysler vehicles.
-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
Posted By: Velocity Motors
Date Posted: November 03, 2007 at 7:05 PM
extreme1 wrote:
ads-al-ca + ads-rngc2 is the combo I use on all new chrysler vehicles.
Wow, isn't that an expensive route to go ? Doing the ADS-TBSL-C2 is a WAY less expensive way to go because the ADS-TBSL-C2 has the chip built into the board on the module while the ads-al-ca + ads-rngc2 are two separate pieces. ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|