clifford rsx 3.5 remote programming
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98495
Printed Date: May 05, 2024 at 4:04 PM
Topic: clifford rsx 3.5 remote programming
Posted By: adaniels88
Subject: clifford rsx 3.5 remote programming
Date Posted: October 31, 2007 at 2:13 PM
I have a clifford rsx 3.5 and I purchased a new remote transmitter, I followed the instructions on the package and it does not work. I open the door, turn the key on, press the valet button, then press and hold it, but the led does nothing. I know the valet button works as I can put the alarm in valet mode but cannot program the new remote. Please help!!
Thanks
Replies:
Posted By: kgerry
Date Posted: October 31, 2007 at 4:33 PM
did you press button 1 on the new remote twice while holding in the switch??
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Posted By: adaniels88
Date Posted: October 31, 2007 at 5:40 PM
The led does not light, nor does the siren chirp, I have pressed the button twice with no results.
Posted By: profuse007
Date Posted: October 31, 2007 at 7:01 PM
remote programming is locked?
bring it to an authorized DEI installer and ask them to unlock it for a small fee.
-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
|