Print Page | Close Window

95 mazda millenia, alarm, lock wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98512
Printed Date: May 13, 2025 at 11:33 AM


Topic: 95 mazda millenia, alarm, lock wiring

Posted By: bodkins_adam01
Subject: 95 mazda millenia, alarm, lock wiring
Date Posted: November 01, 2007 at 3:19 AM

OK well i got my new two way alarm system in yesterday and i took it to get installed and everwhere I took is talking 2-300 bucks to install it. So being the persistant person I am I took it upon myself to install it. well I have everything hooked up except the door locks everything is working like it should but the main reason I bought it is because my drivers side door lock is broken. There was already an aftermarket alarm in my car so I just basically followed the wires to that. My question is if there was an aftermarket alarm do I still need to hook up an 1k ohm meter or should one already be there.....

-------------
Adam



Replies:

Posted By: KarTuneMan
Date Posted: November 01, 2007 at 10:46 AM

Follow the wires BACK to the brain from the connection @ the car.... it wil be obvious, if there is one installed.

It's not part of the car. If you were going to pay for the install.... you should have purchased the unit installed.

You might not have bee able to get "the one you WANT" but it would have included labor.


Print Page | Close Window