neon lights during remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9855
Printed Date: May 17, 2024 at 3:09 PM
Topic: neon lights during remote start
Posted By: bobs94
Subject: neon lights during remote start
Date Posted: February 21, 2003 at 11:17 AM
I have a Viper 550 ESP alarm/remote start. I want to wire it so that my undercar lights turn on during the remote start process, but turns off when the key is in the ignition. I have an idea of how to do this, but I am not sure if it will work. I think I want to use the blue H3/1 status output wire from my alarm. Thank you for any help.
Replies:
Posted By: floaterr
Date Posted: February 21, 2003 at 4:40 PM
Yes use H3/1 Connect on relay as follows
Both 85 and 30 to neons power source positive 86 to the H3/1 wire 87 to the postive feed to the neon
Good luck
Posted By: camino
Date Posted: February 25, 2003 at 7:55 PM
that's a good idea,how about if you do this:
#85 to parking light's output from alarm (+)
#86 to the blue wire that is negative during remote start
#30 to 12 volt constant
#87 output 12v to your neon light's
this way the neon ligths will do the same ligth the parking ligths,flash.of course if you would like it to flash.
Posted By: ViperATC5
Date Posted: February 25, 2003 at 10:17 PM
you can also program parking light output to remain constant throughout remote start
|