Print Page | Close Window

viper 350hv

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98764
Printed Date: May 19, 2025 at 2:48 AM


Topic: viper 350hv

Posted By: 02stang
Subject: viper 350hv
Date Posted: November 08, 2007 at 9:13 AM

i need the install manual and all the links i could find are from direct techs and i cant get into their website anybody have a link?

thanks sorry to bring up a old topic




Replies:

Posted By: profuse007
Date Posted: November 08, 2007 at 3:34 PM
The unit is very similar to viper 300esp but heres what I can remember on top of my head:

12pin main harness:
-red(+) 12v input
-black ground
-RED / white (-)200mA output trunk pop
-green (-) door input
-purple (+) door input
-blue (-) trunk trigger input
-yellow (+) ign input for valet and programming
-white(+/-)selectable polarity ~5A output parking light
-brown (+) output to siren
-BLACK/ white(+) domelight
-forgot the starter kill color code.

3pin harness doorlock
-blue (-) 200mA unlock
-green (-) 200mA lock

disarm/rearm harness-if exist
-light GREEN / WHITE(-) 200mA disarm

That is all you need for installation. I hope I am not forgetting anything. For other detail infos, you might want to check w/ the download section.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).




Posted By: howie ll
Date Posted: November 08, 2007 at 5:12 PM
Is there also a grey for hood switch input?




Posted By: 02stang
Date Posted: November 08, 2007 at 6:39 PM

thanks for the help i saw a pdf install guide somewhere online last week i just cant find it again





Posted By: another-kelly
Date Posted: November 09, 2007 at 3:36 PM
howie ll wrote:

Is there also a grey for hood switch input?


not on the 350. it's alarm/keyless only. the solid blue in the 12 pin harness can be used for a trunk/hood trigger





Print Page | Close Window