Print Page | Close Window

97 acura cl 3.0 r/s factory alarm disarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98767
Printed Date: May 18, 2025 at 3:43 PM


Topic: 97 acura cl 3.0 r/s factory alarm disarm

Posted By: skylar86
Subject: 97 acura cl 3.0 r/s factory alarm disarm
Date Posted: November 08, 2007 at 10:48 AM

Hey everyone,

Installing an Autostart AS-2452TW-V Remote Start into a 97 Acura CL with factory alarm(w/siren).

The alarm arms/disarms with lock and unlock. I presume I can just hook my (-) out's from the brain lock/unlock for the power locks?

As for the remote start sequence from what I can tell the alarm will go off unless I disable it first. Luckily I have a "Disarm without unlock(-)" available to me at the security module.

Which (-)out from the brain should I hook up to this?
1) Ground when running
2) Disarm

Thanks in advance.



Replies:

Posted By: KarTuneMan
Date Posted: November 08, 2007 at 11:59 AM

Use disarm , to disarm..... the ground while running would be used to trigger a bypass module!


Print Page | Close Window