viper 5900 in 08 sprinter w/canbus
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98785
Printed Date: May 01, 2024 at 7:46 PM
Topic: viper 5900 in 08 sprinter w/canbus
Posted By: cujo613
Subject: viper 5900 in 08 sprinter w/canbus
Date Posted: November 08, 2007 at 5:52 PM
Anyone ever attempt this without modules. DEI has no modules The info I have received is the canbus wires have to be triggered in a certain sequence any help would be great ------------- Alpine dva-7669 Alpine cva-1004 Zapco 360.4 zapco 1100.1 2 image dynamics idq v2 fifteens Alpine type r 5.25 components and 6x9's
Replies:
Posted By: extreme1
Date Posted: November 08, 2007 at 9:27 PM
as of this time it's not possible, the start command is data, no one has an interface.
I have looked into it, I guess the transponder communicates via RS232 and the ign via CAN.
-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
Posted By: extreme1
Date Posted: November 08, 2007 at 9:29 PM
accually, here's exactly what I found out.
here's the info I got from one of my tech guys
"2 CANbus networks + UART for immobilizer... Everything handshaking..."
and
"no one will have a bypass available for it, for quite awhile "
-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
Posted By: howie ll
Date Posted: November 09, 2007 at 1:52 AM
Shaughn, thanks for your comments, I've had to blow away half a doz installs on these (Mercedes Sprinters here) and I have been cursing them, panel with differential (front/back) locks, front back dome lights and Haz, 4 wires! In theory these can all be picked up as analogue under hood but where do you start?
Posted By: cujo613
Date Posted: November 09, 2007 at 9:57 AM
thats what we were thinking that you can pull it off by going under the hood But some of the info that we gathered some of the canbus ignition needs to be triggered in a particular sequence or all hell breaks loose ------------- Alpine dva-7669 Alpine cva-1004 Zapco 360.4 zapco 1100.1 2 image dynamics idq v2 fifteens Alpine type r 5.25 components and 6x9's
Posted By: howie ll
Date Posted: November 09, 2007 at 12:29 PM
As I said before over here even the '05's were a problem withdifferential locking ex factory, locks all, unlocks front doors then another remote button to unlock rears, the relays were located under the drivers seat!
|